Passive matrix addressing is an addressing scheme used in earlier LCD displays, and may be used in future LCD displays. This is a matrix addressing scheme meaning that only m + n control signals are required to address a m × n display. A pixel in a passive matrix must maintain its state without active driving circuitry until it can be refreshed again.
A new display technology uses a bi-stable pixel, which maintains its state indefinitely without the need for individual transistor elements at each pixel.
The signal is divided into a row or select signal and a column or video signal. The select voltage determines the row that is being addressed and all m pixels on a row are addressed simultaneously. When pixels on a row are being addressed, a Vsel potential is applied, and all other rows are unselected with a Vunsel potential. The video signal or column potential is then applied with a potential for each m columns individually. An on-lighted pixel corresponds to a Von, an off-switched corresponds to a Voff potential.
The potential across pixel at selected row i and column j is
- Vij = Vsel − Von | off
and
- Vij = Vunsel − Von | off
for the unselected rows.
Theres also the Active matrix addressing, if you are intrested in some more information about it visit : http://en.wikipedia.org/wiki/Active_matrix_addressing .
Nice post. I read your post. I have less idea about Liquid crystal display. But After read this post i get lots of idea about it.......thank you for sharing........
ReplyDeleteGreat news. Thais type of post really create interest people for read. I also waiting for see Liquid crystal display..............
ReplyDelete